65

Wood Temp Tower(lemmy.world)

posted
*
by
Avatar
MissJinx@lemmy.world
in
Avatar
3dprinting@lemmy.world
21 comments
hidereport

This is the temp tower of my wood print experiment Cand even se much difference. It goes from 260 to 190. Below 225 gets really flimsy and above 240 melts. But even 230, the “best” one is really bad, and I’m not talking about retraction. Even the layers that melt are inconsistent.

Also it’s not humidity since the filament was in a filament dryer for.16hours.

edit: The nozzle is 0.8

can someone think of anything else?

Sort:
HotTopControversialNewOld
You are viewing a single thread.
View all comments
Avatar
KeraKali@lemmy.world
12 points

Are you sure the gcode actually makes the printer change temps? Good thing to double check since it looks the same throughout

permalink
report
reply
Avatar
MissJinx@lemmy.worldOP
5 points

hum ill check but I used orca native temp tower and chrcked through the print? it didi chsnge. could it be a hardware problem?

permalink
report
parent
reply
Avatar
Linktank@lemmy.today
6 points

If you focus only on the little pylon within the circle you can see a clear trend.

permalink
report
parent
reply

3DPrinting

!3dprinting@lemmy.world

Create post

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

  • No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.

  • Be respectful, especially when disagreeing. Everyone should feel welcome here.

  • No porn (NSFW prints are acceptable but must be marked NSFW)

  • No Ads / Spamming / Guerrilla Marketing

  • Do not create links to reddit

  • If you see an issue please flag it

  • No guns

  • No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

Community stats

  • 1.9K

    Monthly active users

  • 1.2K

    Posts

  • 16K

    Comments

Community moderators