cross-posted from: https://discuss.tchncs.de/post/22828099
USB was supposed to rule them all but it’s now a mess of standards sharing the same connector. Different speeds, voltage, charging protocols, alt modes, even the number of pins used is variable… For those asking, the thing is available on Kickstarter
This 100%. Wi-Fi Alliance did it right ditching the standard names like 802.11ac and 802.11ax and going to simple names like Wi-Fi 5 and Wi-Fi 6. Everyone knows 6 is better than 5 so there’s no confusion.
USB-IF needs to do the same thing, and also stand up a little bit to the manufacturers who want to build the cheapest possible products. Set a couple of certification levels. Like level 3 cable supports 30 w and 480 Mbps USB 2.0, level 4 cable supports 100w and 2 gbps, level 5 cable supports 100w and 10gbps, level 6 cable supports 240w and 20gbps etc We don’t need infinite variations of power and data capability. It just confuses customers. But customers will understand a level 5 cable is better than a level 4 cable. And if the device says you need a level 5 cable for full capability, they will understand a level 4 cable isn’t good enough.
