Saturday’s temperature had triggered an excessive heat warning across Arizona as lows were expected to range between 80F and 86F
On Saturday afternoon, the National Weather Service announced that the temperature at Phoenix Sky Harbor international airport reached 110F, making it the 54th day this year with temperatures of at least 110F.
Saturday’s temperature breaks the previous record of 53 days that was set in 2020. From 1991 to 2020, the average consecutive days of 110F or above is 21 days, the NWS said.
An excessive heat warning has been issued for south central and south-west Arizona until 8pm on Sunday as weekend highs are expected to range between 108F and 114F. Meanwhile, lows are expected to range between 80F to 86F.
110F = 43.33C if anyone else was wondering.
It’s also getting towards the end of the summer there when it gets humid.
Metric: 1 calorie heats 1 gram of water 1 C°, 1 gram is equal to 1cm³. Water boils at 100 C° and freezes at zero.
Imperial: 1 calorie heats 1 something by ?? F equal to ???, and 0F and 100F are completely irrelevant to everyday life and tasks.
I get your point, but disagree with your thesis. Fahrenheit makes a lot of sense for human comfort ranges. 0 and 100 are some of the most extreme natural temperatures most people in F-using countries ever see. 0 means cold as fuck and 100 means hot as fuck. And there’s a single-digit useful precision to it as well. 72 and 73 are close, but noticeably different. Celsius requires decimals for that kind of difference. And 0 means “it’s kinda cold outside, I guess” and 100 means “you were dead a long time ago”, so it’s not nearly as useful in every day life with natural living temperatures.
0 means any water outside will most likely start freezing, 100 means any water outside will be boiling. Makes sense to me. What temp do things start freezing in F? 30? 40? Doesn’t make sense at all. What temp does water boil? 160? I dunno, none of it is rational in any way.
I get your point “but because I was brought up with this system I’m going to make an argument as why it makes sense to me”
25 Celsius is a nice summer day
0 Celsius you better take a jacket and it’s probably going to snow
43 Celsius damn hot
60-80 Celsius a very nice sauna
It’s not that hard burgerman
Any usefulness of Fahrenheit is purely accidental, how is water freezing at 32F useful? I’ll grant that the finer resolution can be seen as a positive, I don’t see how Fahrenheit is better for human comfort, my personal optimal comfort zone is 22-24C°, and I have no need for decimals for that. 73F is pretty close to 23C, I don’t see much difference regarding comfort in either.
The huge problem with Fahrenheit, is that it is impractical in many situations, it has basically no merit to justify its existence, and only a minority of countries continue to use it.
Of course Americans can do whatever they want, but they are looking stupider for each year they keep using “Freedom Units”.
Of course Americans switch to metric for mostly anything scientific, for example NASA use Metric.
So you’re saying it’s relevant for basically nothing but the weather. It’s not a very good argument.
If it requires this much explanation, it’s not very sensible.
In Celsius 0 is freezing and 100 is boiling. It’s so simple. “Comfortable” is anywhere from like 15-30 (my Canadian standards, very subjective I know) and we don’t need decimals.
Use the right tool for the right job. Fahrenheit helps plan your day, with weather or pool temperatures or whatever. Celsius is for science and engineering. This argument sounds a little like driving a nail with a torque wrench.
I can ballpark C to F. But pressure is never going to happen. Like what’s 30psi? 547000 Pa or something? Who the fuck knows. Or you could use bar, with a scale of 1 to 5, lol.
In what scenario is Fahrenheit more intuitive to someone who grew up with neither of the two systems?
but how often does knowing how to convert water weight to volume come up? Same with the energy to heat water.
The water/weight comes up all the time. Filling a 10L bucket, I know that is going to weigh 10kg. I know I can lift it and my kid can’t.
The energy one, I’m not even sure is right. We don’t use calories, we use kilojoules. A joule is used to lift 1kg 1m. It’s not something I ever use. I use kilojoules for tracking food I ate today, that’s about it.
Weight to volume is extremely common when I cook, because often things are measured in volume, but I prefer to use the weight.
½ a liter water or milk or almost any fluid without extra dish-washing? Easy you just put it on the weight, select tara, and pour 500 grams. Voila you just saved both kitchen space and extra work. because 1g = 1ml with water and most fluids.
It’s equally easy if the number given isn’t in liter, ml or milliliter of course converts directly to grams, and dl or deciliter = 100 g. 1 liter of course being 1000 ml and in water 1000 g or 1 kg. It’s consistent all the way through.
I guess if you are used to Freedom units, this may sound like science fiction, but this has been reality in many countries for a long time already.
I’m a fan of the metric system, but understand that Fahrenheit is pretty convenient for regular human temperatures. For one, the vast majority of climate temperatures that we experience in the US on a regular basis land between 0°F & 100°F except for deserts & recent climate change impacts. For another, Farenheit is a bit more precise as whole numbers since differences between degrees are smaller, so I can be more precise with my a/c thermostat.
Still, I would prefer that we change to metric across the board in the US because it is more congruent across dimensions and decimals are easier to manipulate than fractions for me. For the latter, if I had a recipe that required I calculate 1/3 cup plus 1/2 cup, I have to switch to 2/6 & 3/6, which equals 5/6, then I’m stuck estimating that anyway since most measuring cups aren’t labeled to the 6th precision. It gets even more confusing when we have to consider teaspoons, tablespoons, & pints. Using liters would be so much more convenient for me. Another area where I get confused is when measurements for food are presented as ounces versus fluid ounces. I understand the difference, but it’s still something I have to think extra about.
My one request in switching over to metric would be that weather and thermostat temperatures are presented at least to the .5°C precision level so that 75°F would be 24.0°C and 74°F would be 23.5°C. Yes, I’m this picky about my thermostat settings and can notice a difference between 75°F/24.0°C and 74°F/23.5°C.
