I’m already hosting pihole, but i know there’s so much great stuff out there! I want to find some useful things that I can get my hands on. Thanks!

Edit: Thanks all! I’ve got a lil homelab setup going now with Pihole, Jellyfin, Paperless ngx, Yacht and YT-DL. Going to be looking into it more tomorrow, this is so much fun!

You are viewing a single thread.
View all comments
53 points
*

Stay away from Plex, if you like to go with Free and Open source.

I’ll start with Jellyfin, and Arr family (sonarr,radarr,prowlarr or Jackett), Vaultwarden and immich

Edit: Learn to spin up docker instances first, as above services would be easier to manage in docker containers and for back ups I prefer Duplicati. And if you run it 24x7 add AdguardHome or PiHole to the mix

Edit1: if you are extremely new to docker instances and find it hard to learn, just spin up CasaOS and you’ll be good to go as it makes spinning up docker containers so easy.

permalink
report
reply
4 points

Plex is a far better and user friendly version than jellyfin or emby in my experience especially if you want to share to friends. Granted it’s not open source and has gone commercial route so there is the risk it will continue there. But for now I wouldn’t push to move. If jellyfin can get some more app support and continue to develop and be ready for when Plex messes up then it will take off.

permalink
report
parent
reply
13 points

True for users who are already setup with Plex, for them there is no reason to switch as of now, but for a person starting from scratch and setting up things for the first time, it makes a lot of sense to get Jellyfin instead of going Plex. As Plex is moving away from their core of making user’s media available for streaming, and rather focuses in pushing its own streaming content (I know we can toggle that behavior off but it is headache fot new comers, and it should be off by default and if a person likes they can turn on Plex’s streaming content, default should be the user’s content)

permalink
report
parent
reply
6 points

A headache? All you need to do is tick a box when you first open the app. There it asks you how you’d like your home screen to look

permalink
report
parent
reply
6 points

It’s also not fully self hosted.

permalink
report
parent
reply
2 points
*

True, it also requires login aa the very first step which makes it communicate with PlexServers, so it not fully selfhosted neither fully private.

permalink
report
parent
reply
0 points

Only if you want to access it remotely without VPN to your home network. Nothing in Plex forces you to use their servers and you could run it in a network without internet connection

permalink
report
parent
reply
5 points

if you want to share to friend

Not if they need their own Plex Pass for so many features. The only thing Jellyfin lacks is user self password resets and transcoded downloads. I don’t really see any other advantages in Plex

permalink
report
parent
reply
1 point

I’m very bitter about them locking my server users out of features I’ve paid for, but unfortunately I still have to suck it up as it’s more user friendly.

permalink
report
parent
reply
1 point
*

Does jellyfin handle audiobooks? For some reason I found the service lacking a couple of years ago, but can’t remember why.

So I got Plex pass and really enjoy it. The Prologue app gives you an audible-like interface for audiobooks that I love. Plexamp for music and Plex Dash to monitor the server. Audnexus matches audiobooks to Audible listings for the metadata. Plex movies and tv match to get metadata, trailers, behind the scenes, cast list, and rotten tomatoes reviews. If Plex ever gets too commercialized/restricted for some reason I’ll switch, but for now I couldn’t be happier.

permalink
report
parent
reply
-1 points

Transcoded downloads are a pretty big deal unless you want to stream 4K blue ray HDR to your iPhone.

permalink
report
parent
reply
-2 points

Transcoded downloads are a pretty big deal unless you want to stream 4K blue ray HDR to your iPhone.

permalink
report
parent
reply
4 points

immich

Did they just nick the Google Photos UI?

permalink
report
parent
reply
13 points

Yes its basically selfhosted Google Photos instance kinda thing. There is a great story the Dev shared once, he was paranoid about backing up things to Google or Apple cloud as they have history of sharing it with Feds. So Dev won’t like his family pictures on such platforms, so when him and his partner were to have a baby, he started working on immich, so by the time baby arrives he’ll have a safe platform to backup family pictures.

permalink
report
parent
reply
3 points

Wow!! Immich looks great. I’ll be getting that going asap. I actually just started paying for Google drive just to have more space for photos and videos. I’ve always wanted to move over to using my server but I just couldn’t find a great Google photos alternative. This looks perfect.

permalink
report
parent
reply
2 points

If the logo said “Photos” I can be sure some couldn’t see a difference between it and GPhotos

permalink
report
parent
reply
2 points

Where do you store your duplicati backups?

permalink
report
parent
reply
4 points

I follow the rule of 3 for backups. So I keeps 3 copies of things I like to back up.

  1. Original (Drive 1)
  2. Duplicati backups (Sent to drive 2 - Same Machine)
  3. Using Syncthing I sync The Backup Folder in Drive 2 to a remote Machine
permalink
report
parent
reply
1 point

I use borgmatic & rsync.net

permalink
report
parent
reply
2 points

Does duplicati have to do periodic full backups?

I’ve used borgbackup / borgmatic. One full backup and only incrementals thereafter.

permalink
report
parent
reply
1 point

I have only seen incremental from 2nd go, but I’ll check if there is a option to switch that and make it full backups even after 1st go

permalink
report
parent
reply
1 point

Would you rate CasaOS over something like ProxMox? I know there is a difference in purpose, since ProxMox is about virtualization and CasaOS is about easy hosting of docker instances.

Do you have an opinion on what is better in the long run for self-hosting?

permalink
report
parent
reply
1 point

Is you like to run MultipleVMs on single machine, then Proxmox is your goto, hands down.

CasaOs is more for people like me, who runs a single OS baremetal and like to have multiple docker instances on that same OS. Basically you need a baremetal Debain or supported Linux OS on which you install CasaOS.

CasaOs is more like portainer on steroids, as it offers you Appstore like interface to get one click Docker container installation. But also offers you control (for more advanced users) where if you like you can manager containers and can have terminal/ssh access along with option to change default volume maps set by CasaOS.

One such similar thing to CasaOS is UmbrelOS, please do avoid that, as it only offers one click installations of docker containers with default volume maps (with no way for you to change it) And it lacks all the advanced features to manage containers like in CasaOS. Atleast CasaOs keeps those options hidden away, so once you become a little advanced you can access it.

permalink
report
parent
reply
2 points

Cool. That might be the better route than virtualization, since basically every self-hosting project seems to use docker anyways.

Of course I can just virtualize CasaOS…

permalink
report
parent
reply
1 point
*

Is you like to run Multiple OS/VMs on single machine, then Proxmox is your goto, hands down.

CasaOs is more for people like me, who runs a single OS baremetal and like to have multiple docker instances on that same OS. Basically you need a baremetal Debain or supported Linux OS on which you install CasaOS.

CasaOs is more like portainer on steroids, as it offers you Appstore like interface to get one click Docker container installation. But also offers you control (for more advanced users) where if you like you can manager containers and can have terminal/ssh access along with option to change default volume maps set by CasaOS.

One such similar thing to CasaOS is UmbrelOS, please do avoid that, as it only offers one click installations of docker containers with default volume maps (with no way for you to change it) And it lacks all the advanced features to manage containers like in CasaOS. Atleast CasaOs keeps those options hidden away, so once you become a little advanced you can access it.

permalink
report
parent
reply
1 point

Also look into Yunohost and Cosmos if you decide to go that route.

permalink
report
parent
reply
1 point

Where do you store your duplicati backups?

permalink
report
parent
reply
1 point
1 point

Where are your remote backups? In your secpnd house?

permalink
report
parent
reply

Selfhosted

!selfhosted@lemmy.world

Create post

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.

Rules:

  1. Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

Community stats

  • 3.4K

    Monthly active users

  • 3.3K

    Posts

  • 71K

    Comments