Additionally, what changes are necessary for you to be able to use Linux full time?
That’s absolutely the worst help forum experience, when you’re asking one question but everyone extrapolates the question they think you REALLY meant to ask and talks down to you about it.
And of course if you try to steer the conversation back to your actual question, you get painted as the unreasonable one placing all sorts of conditions on the generous free help others are allowed to bestow upon you.
The less reliance on others Linux requires, the better off it will be for general adoption.
everyone extrapolates the question they think you REALLY meant to ask and talks down to you about it
It’s true, but the “X-Y problem” is real.
The question may be “what’s the best way to do X”, when they actually want to do Y and they concluded, erroneously, that X is the best way to do it. Responders suspect this, so they want to steer the questioner to a best explanation to find out if that’s the case, just to watch the questioner’s tantrum when the immediate answer is not what they expect.
Speaking only for myself, if I want to know the best way to do Y, I ask about how I can do Y. If I’m at the stage where I’ve moved on to asking about how to do X, there’s a reason I want to approach the problem that specific way – personal preference, limitations of my setup, learning a new approach, whatever else – and I’m not there to get into some asinine argument defending my choice, I’m there to find out how to do X.
So while I’m well aware of the thought process behind it, I will never not find it incredibly disrespectful to disregard the question being asked in order to make snarky little guesses at intent and answer a totally different question.
This, of course, assumes perfect understanding on your part. That could be a mistake, specially as you are, you know, asking for help.
Haha your second paragraph sums it up perfectly. A few folks did share their settings, but they were for completely different printers/hardware haha. Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby, and it’s strangely spread out in random little nooks of the internet - there’s not really a ton of centralized discussion forums. Maybe the hobby is way smaller than I thought, or maybe I’m just in way over my head, but I fix tech problems for a living - did not expect this to be as much of a challenge. Never buy a 3D printer if you value your sanity and living stress-free. Sorry, I just needed to rant for a minute haha.
Yeah 3D printers are fussier than I expected. Especially when printing anything involving supports and more specifically… small areas that need supports. I print a lot of stuff for D&D and have just started cutting things up into pieces with blender to print easier, then glue it together
I will say. My first thought was obviously to ask what what printer, to see if I could send you my profile for you to compare (depending on the soccer you use). Then my second was to ask if you’re having issues and if so, what the issues are.
Only because sometimes a seemingly large issue could be a very small fix.
When I first started, I got it working great and then out of no where nothing would stick to the bed. I spent more time than I’d like to admit messing with settings only to realize it was the oils on my hands causing adhesion issues. Some 99% IPA fixed all my issues real quick haha.
That would be awesome! I’ve got an Ender 6 with a Micro Swiss NG extruder. I was printing decently with the stock hardware, but that stock extruder was a nightmare and kept slipping or completely losing grip on filament mid-print, so I upgraded to this extruder. Now I’m just trying to find that perfect spot to where it extrudes but doesn’t grind filament. I’ve been having some really messy prints.
I just had a feeler gauge arrive in the mail, so I’m about to use that to try leveling the bed more accurately. Everyone says to just use a piece of paper or something, but different paper is different widths haha.
I do have a PEI bed, so stuff sticks and comes off way easier now, but I would love to check out your slicer settings to get a good baseline! What kind of hardware do you have, and which slicer do you use?
Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby
I’ve had exactly the opposite experience lol. Most of the stuff out there is dreadfully basic, and if you want detail like scientific comparisons of the strength-weight ratios of different infill patterns, good fuckin luck. Some chum on YouTube will have some half baked experiments and that’s as good as it gets.
