33

Prusa MK3s+, PETG and a 0.6 nozzle(lemmy.world)

posted
*
by
Avatar
RubberElectrons@lemmy.world
in
Avatar
3dprinting@lemmy.world
19 comments
hidereport

Hey everyone.

I built an mk3s+ from its kit form successfully, tested a few PLA prints with the stock 0.4 nozzle.

I’ve set prusaslicer to use a 0.6 nozzle now that I’ve upgraded, and am using PETG. Prints look pretty bad, in spite of calibrating z-offset etc.

If you were doing something like this for the first time, what would your setup steps be like?

To be specific, using a diamondback 0.6 nozzle, matterhackers PETG at 235c.

Issues I’m seeing are a really bad loss of detail, lots of stringing, etc.

eta: added a photo of a moderately post-processed part. Notice how rough the top surface looks, there’s a disconnect between perimeter loops, etc.

Sort:
HotTopControversialNewOld
You are viewing a single thread.
View all comments
Avatar
Vashtea@sh.itjust.works
2 points

Is there a nozzle setting in the printer too?

permalink
report
reply
Avatar
👍Maximum Derek👍@discuss.tchncs.de
1 point

This is my guess based on OP not mentioning changing printer profiles or rerunning a wizard.

permalink
report
parent
reply
Avatar
RubberElectrons@lemmy.worldOP
3 points

It’s been set to 0.6 on both printer and slicer during the setup process.

permalink
report
parent
reply

3DPrinting

!3dprinting@lemmy.world

Create post

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

  • No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.

  • Be respectful, especially when disagreeing. Everyone should feel welcome here.

  • No porn (NSFW prints are acceptable but must be marked NSFW)

  • No Ads / Spamming / Guerrilla Marketing

  • Do not create links to reddit

  • If you see an issue please flag it

  • No guns

  • No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

Community stats

  • 1.9K

    Monthly active users

  • 1.2K

    Posts

  • 16K

    Comments

Community moderators