TL;DR
- The European Council has ended its adoption procedure for rules related to phones with replaceable batteries.
- By 2027, all phones released in the EU must have a battery the user can easily replace with no tools or expertise.
- The regulation intends to introduce a circular economy for batteries.
Want to replace the battery on your 2 years old smartphone that is perfectly good, but the battery doesn’t last as long?
Just grab a heat gun and melt the glue around the screen. With a suction cup, pull the screen apart and pry around the perimeter to separate the screen. This might end up in your display cracking if you apply too much force. After the screen is successfully separated unscrew a large number of screws of all shapes and sizes and make sure not to mix them when you put them back together after you’re done. Carefully disconnect the tiny flat cable connectors. Then you need to separate the battery itself. It has two pull tabs that makes a satisfying noise when pulled, in order to release the glue. But especially if you’re not experienced these are likely to tear, leaving the battery attached. Don’t try to pull the battery away as it may result in damage to the battery and turn it to an instant spicy pillow or twist the frame of the phone making it wonky. You can use isopropyl alcohol to weaken the remaining glue in order to free the battery. After it’s removal, put the new battery in it’s place. Make sure all the alcohol had evaporated. Then put the phone back together pretty much as you took it apart. Make sure not to forget any screws or mix between them. Then glue the screen back together with a strip of glue. If you used to have water resistance it is now likely compromised.
That’s what it means to replace the battery in some phones. This shouldn’t be legal.
Yeah, exactly that. It’s a lot easier than it sounds. I was surprised myself on my first try, then it a few more times. But even if you’re not comfortable doing it, I don’t know how it is in your place, but in my hometown there are tiny repair shops in every mall and every corner in between, that could do this for you in less than an hour. Most of those shops jobs are not batteries, though, nor screens, but broken usb ports, and you can’t make those swappable :(
That is way more complicated than not should be.
Why should I put up with that rather than just taken the back off and pop it out?
Less weight, less thickness, increased durability, reduced cost.
The downsides are:
- You can’t carry spares (Just use a power bank)
- You’ll have to pay like $30 to swap the battery (You probably never would, worst case scenario is you’d do it twice over phone’s lifetime)
