Lemdro.id

10 points

7 months ago

Second that.

RPis are still unbeaten in terms of power usage, but the difference to a low end thin client is small.

Cost isn’t really an argument either, you can get thin clients with case, psu and SSD for something like 40€.

report

[ - ]

ShortN0te@lemmy.ml

6 points

7 months ago

RPis are still unbeaten in terms of power usage, but the difference to a low end thin client is small.

Not even close when it comes to tuned idle power usage.

report

[ - ]

4 points

7 months ago

My pi 3 idles at 3-4W, my Futro at around 5-6W. I’d say that’s pretty close.

report

[ - ]

ShortN0te@lemmy.ml

1 point

7 months ago

You can get your 3b+ (and 3 even lower) to under 2W easily on idle. 3-4 is a lot. Check out some guides, basically disable BT, display out and WiFi.

report

[ - ]

5 points

7 months ago

So, basically don’t use it.

I mean, I get the effort, but if you account for your own labor, the power savings probably will probably take years to amortise - even with high energy costs like here in Germany.

Just as a rule of thumb: 1W of constant power costs is at most 25cents (40cent/kwh, which is even high for Germany).

report

[ - ]

ShortN0te@lemmy.ml

4 points

7 months ago

Just as a rule of thumb: 1W of constant power costs is at most 25cents (40cent/kwh, which is even high for Germany).

The cost for a year is 1W24h365=8.76kWh which are at 0.4€/kWh 3.504€.

So with a difference of 3-4W you pay in a year between 10.5-14€ more than for the pi.

And i often heard the claim of thin clients idling around 5-6W, but i never got proof. Most things i saw are around 10W. Can you provide a picture? I would be really interested, honestly.

report

[ - ]

1 point

7 months ago

I use a cheap watt meter and the values from above are from that meter.

10-15W is what my Dell optiplex idles at.

I guess, it also depends on your load. My measurements were made at “basic setup idle”, so smb, k3s with a handful of idling containers, pihole. Since I’m the only user of these services and don’t use them that much, the load average is often enough way below 1 (at 4 cores). It’s absolutely possible that someone with higher demands and higher loads pulls more power on average.

report