EDIT: We decided not to pursue further diagnosis, because we wouldn’t know what the hell we’re doing anyway, and decided to start the RMA process instead. It might not even be the reason why the PC won’t turn on, but I’m not comfortable with putting that CPU back into his PC again. Once we get a replacement, we’ll see what happens. If it’s still busted, we’ll just take it to a local shop. Thank you everyone for your for your suggestions and insight, they are very much appreciated.
My friend called me to take a look at his PC that wouldn’t turn on. Upon inspecting his CPU, I noticed a silver bump at the bottom. I’ve never seen this. Can anyone tell me what it is?
Yeah, that’s the weird part. We were playing online without issue just a few weeks ago. His PC only died sometime last week.
![[RMA] What is this lump on my friend's CPU?(lemmy.ml)](https://lemmy.ml/pictrs/image/ac0d8c0a-45b4-417a-aa53-f5185f0e6494.jpeg){kind=link}
That is sooo weird. Unless that thing shorted and heated up so much that it melted the solder, in this case I’m not sure there’s any extra harm in putting it back in the socket. I usually wouldn’t advise this but if it was gonna cause damage it’s probably already done.
At this point I think there is a definite possibility that this solder blob has always been there and that we may be barking up the wrong tree.
Unless that thing shorted and heated up so much that it melted the solder, in this case I’m not sure there’s any extra harm in putting it back in the socket. I usually wouldn’t advise this but if it was gonna cause extra damage it’s probably already done.
Fair point. I’m probably not going to experiment too much. I was just curious about the silver blob, because I’ve never seen this before. If I can’t find any obvious faults, I’ll just advise my friend to take his PC to a repair shop or something.
Alright, well if you want you can let me know what actually happens when you push the power button. Any beeps, lights, fan spins, clicking, demonic apparitions, just completely dead, etc.
Sometimes just reseating everything is the fix too.
With a bit there the cooler probably isn’t making good contact with the CPU, but if that was the case I wouldn’t expect it to just die if it was working before. Though the higher heat may have caused permanent issues too, hard to say.
I have an all in one CPU liquid cooler that had a bracket on incorrectly but it still worked fine until I played with overclocking so that’s all I base this comment on.