Job: cashier
Item doesn’t scan
Customer: “That means it’s free, right?”
🙄🙄🙄🙄🙄
Only about 4 weeks in as a cashier and I’ve heard this enough to last me a lifetime.
“These Samsung appliances look nice…”
Yes they do— and that’s all they do well. That, and break in expensive ways, often and early.
Avoid Samsung appliances.
Edit: I sell appliances
Note for those reading -
This doesn’t apply in Europe, or large swathes of the planet. Samsung appliances are excellent.
The US has virtually nonexistent consumer protection laws, so companies will get away with selling poor quality, because they can.
See the Hyundai scandal. Only happened in one country, because it could
Breathe easy, EU folks
Really? How can a company make terrible appliances for a single country? They’re not made domestically.
Same factory just send the units that normally wouldn’t be sellable (defects and such) but still function to the US
Less regulations means more shortcuts. Another example is Hyundai/Kia. Why do the Kiaboyz exist only in the US when Kias are sold all over the world? Because it’s only in the US where they sold cars without immobilizers because they weren’t required to.
The main manufacturing of Samsung appliances takes place in South Korea, with a washing machine manufacturing plant also located in South Carolina, USA.
Go to Europe
Enter shop
Buy fridge
Carry home
Realise it doesn’t work because you have girly electricity
That’s disappointing since Samsung is such a big and well-known brand. Good to know though, so thanks.
Even as an iPhone guy, I’ll say that their consumer electronics are just fine. Very good, even.
But their appliances are crap. Apparently, they used to be quite good, but once they got a bug up their ass about sticking a bonkers amount of tech into them, they started cutting costs on build quality, so they just don’t last more than a few years before parts start crapping out.
Companies like LG and GE are much better at balancing tech, quality, reliability, and price points.
I can’t stand “fancy” electronic appliances. I hate all the musical beeping and half the time the panels don’t even recognize my finger taps. It makes doing chores more frustrating than it already is.
We recently bought a fixer-upper and have had to replace a bunch of old appliances. I told my husband the simpler/cheaper the appliance is, the better. Knobs over digital displays.
The only time I like the newer digital versions is with microwave ovens.
I don’t know if it’s still an issue, but their older TVs were riddled with bad capacitors: https://www.cnet.com/tech/home-entertainment/samsung-settlement-warrants-older-tvs-with-faulty-capacitors/
I still have one of their HD TVs from like 2012, and it has bad capacitors and periodically resets itself, but I’ve never had it fixed 😅
I am surprised to hear this. I have not had any issues with my Samsung devices. I have a fridge, washer, dryer and television.
My entire Samsung appliance experience is one dishwasher but it was so shit that I was happy when it broke after 18 months and I will never buy another Samsung appliance. Didn’t clean things and smelled like death if we didn’t manually clean it once a week and run it empty on sanitize and never leave the door closed. Searching the internet told me it was widespread and people were considering class action lawsuits.
It looked nice though. And was quiet.
The only Samsung products I have never had not fail on me is RAM and ssds, and the only reason the ssds have not failed on me is that I’ve not bought their latest ones that have sudden mysterious failure issues.
Every single Samsung product I have ever owned has broken, and almost always when it’s not actively in use. I go out of my way to tell people about this and to attempt to dissuade them from using Samsung products because of this.
Ironically just repaired my samsung dryer. Two drum felt gaskets, and the belt since it was disassembled. Front gasket failed and tore out. After examining all components, the torque of belt drive pulls on one side of drum, this puts extra pressure one one set of the drum rollers (Rh side). The rear one is near the hot air duct so it gets more extreme working conditions. bearing has worn shaft slightly and plastic wheel was partially fatigued, so looks like that rollet was dragging and so belt pulls down more front of drum pinching seal from extended weight and torque. The paint was worn off the housings in this section so felt gasket had more friction in that zone. The rear roller near the heating generator duct is a bad design. especially since it hangs off the back housing which is quite flexible in that area. Thankfully the repair was simple, other than completr disassembly , but not convinced it will last long.
Worked IT .
Everything is working
“Why do we even pay you guys ?”
Something is broken
“Why do we even pay you guys?”
We send out a monthly internal newsletter to management summarizing what we did that month in layman’s terms.
We also include info about major security breaches, hacks or system failures that affected other companies along with a short explanation about why it didn’t affect us.
It still goes over the head of management, but it gives them the feeling we’re smart, on top of things, and important.
Im a locksmith.
Customer: Do you make duplicates? Me: Yes C: How much? M: Depends on the type of key C: The normal one M: -_-
Or, after opening a customers door who was locked out:
C: Why so expensive tho? It only took you five minutes! M: -_- (Thats exactly why you dumb fuck, and I told you the price beforehand)
I also hate when people tries to haggle the price because I know for a fact that Im the cheapest locksmith in the area.
Meanwhile you’ve spent 30-60 minutes driving for their problem. I feel ya.
Yeah, I have thought about it. Perhaps some day when I get really tired of that BS I will do it but for now, I need the monies.
That reminds me of the joke where a factory has a big machine break down. They call in a specialist to fix it.
The specialist looks at the machine for a moment, hits it with a small hammer and it starts working instantly.
But on being told that the repair cost is $500, the factory owner is outraged and asks how that can possibly be justified for less than a minute’s work.
“Well, it’s $5 for use of the hammer, $495 for knowing exactly where to hit the machine.”
Tbf I’d be kinda pissed (at the situation not you) if I called a locksmith and they just whipped out a Carolina roller and got in in .3s lol.
“Goddammit where can I get one of those?!”
(Internet of course. I already have a long and a portable.)
Yep, hooks, shims, combs, etc. I love them, customers hate them. Get a better door/lock is what I tell them, but your next lock out might be more expensive.
Oh for sure. I meet in the middle, my deadbolt is alright, and it’s always locked unless I’m actively using the door, if I walk out without my keys I’ll get locked out because of the knob, but I can just shrum my way right past the knob lock and retrieve my keys so I can lock the bolt on the way out, and be good to go!
The only thing I need a locksmith for is I have a safe that needs to be re-locked with a dial instead of digital.
Job: Welder
Customer: “Hey I need a welder to fix the railing at my business.”
Me: “OK, I can start work after you close for the day.”
Customer: “Oh no, I’m not staying late. I need you to fix it during business hours.”
Me: “OK then, it’s dangerous work so I’ll need to rope off the area and erect screens to protect the general population from weld flash and grinder sparks.”
Customer: “Oh no, this walkway needs to stay open for customers during business hours.”
Me: “Again, this is dangerous work. Somebody is going to get hurt if they’re permitted to walk through the work area.”
Customer: “I don’t know why you’re being so difficult, just zap zap and you’re done.”
Me: “No, it’s going to take a lot of work. The railing is rusted through so entire sections need to be replaced. It also needs to be level, up to code, cleaned for safety reasons, support the weight of an average adult human, and painted to prevent corrosion. We’re talking multiple days of work and it’s not cheap.”
Customer: “Repairs are not in the budget, but I can spread the word and tell all my friends about you. I have almost two hundred followers on Facebook.”
Me: (silently gets up and walks away)
Customer: “Look at that, another lazy Millennial who doesn’t want to work. Typical. No wonder this nation is going down the crapper.”
My executive saying “Revenue is up 30% YoY! […] Due to budget cuts we’re limited to a 4% raise+CoL adjustment this year.”
That sounds like a dream. Last place I worked aa an employee, we got “col” 9which was actually less than 1/3 the government-declared col) plus as much as 1.1% merit increase.
Typical raise for a high performer was around 2%.
