My laptop is an MSI Sword 15 A11UD. But I’m really looking for a program that analyses and projects problem areas and supported/unsupported hardware
There is a website to check which hardware is supported (on which distro). You can look up your laptop there, but beware that it is crowdsourced, so there might have been tinkering involved before submitting the results or the results may be outdated.
Click on “probe your computer” then check the results to see what your current setup supports.
you could also just boot to a live distro and test your hardware. id recommend mint
a quick and dirty way to find out if your hardware is supported is to try out a live usb distributions that runs entirely off of a usb stick and never makes any permanent changes to your system.
it will run MUCH slower than a regular installation; but if you see all of your hardware and drivers enumerated in lspci; you’ll know that it works out of the box.
you should know that this limits you to the distros that have live usb images only; but if you go with mainstream debian, fedora, arch, etc. you’ll instantly know that downstream distro’s are capable of supporting with that hardware with that version of the mainstream distribution that they’re forked from (eg ubuntu from debian; manjaro from arch; suse from redhat; etc.)
i used this method extensively when i was new to linux and distro hopped a lot; it taught me a lot when i first started out.
I find quite often that the Live version of a distro will work perfectly, but after install some hardware won’t work anymore.
yes, that will happen.
the live distro’s come included with a lot of preloaded driver/firmware that is not included with a regular installation for a myriad of reasons; but you can use lspci and lsmod from the live environment to identify the proper software you need to add to your regular installation to get that hardware working.
It’s just weird that after install it can’t detect my hardware and pull the drivers it needs like windows does.
Thank you, that’s useful info, I didn’t know about this. Could you be so kind to share some link, or say something more, about lspci and lsmod and how to proceed from them to identifying which drivers one should install? Cheers!
Yes, it’s called Linux. Just boot any live usb and you’ll see.
I get what you are asking: Why try hundred distros, just tell me the one that works, but I’m not aware of any such tool. If an open-source driver exists the kernel is really good at auto-detecting everything and make it work.
@Melatonin
I installed a linux onto an USB stick
installed Hw-probe. Created a little script that saved the result to disk. and opened the browser to the result page.
And went to a Store:
- Insert USB Stick
- Press SHIFT on a Windows PC
- Than do a Power off on Windows
- chose reboot to stick
- connect smart-phone with thetering
- run HW-Probe script
I was allowed to do that on every store i visited. Mostly I asked if the local staff would like see a running linux.
That way I choosed my current laptop
