I feel a bit sheepish having to ask this, but has anyone successfully gotten their deck to display on a LG TV (C2 to be precise)? I have the official dock and that works for other devices like my laptop or surface pro but no dice with the deck itself.
I’ve tried various things like resetting the device, resetting the dock, changing the order of connection them all up but not managed to get anything to show it. I also checked that the HDMI cable I’m using works for up to 8k. A bit frustrating as one of the reasons I got the device was to be the living room PC/link to my gaming PC!
That is weird, so you’ve tried the exact same setup with a different TV and it worked?
I wonder if it’s the resolution, or maybe HDR settings? What is different about the other TV if it works there? 1080p only? I’m just spitballing trying to get gears moving
On my C9PUA it just works with the dock.
Did you try locking FPS / Display settings to 60 on deck/TV?
AMD only does 60hz over HDMI because HDMI forums. Need Display Port for beyond 60hz.
Thanks for the suggestion, do you know where I can lock FPS on the deck? Had a hunt around in Display settings but I can’t see anything
Upon checking the Steam Display settings… You could try toggling the External display safe mode button to on.
I know on Desktop mode when it is docked, under KDE Plasmas’ System Settings > Display Configuration when docked, should have more resolution and refresh rate options. For the TV display
So I just noticed on my OLED solo on the screen it only allowed 90hz. Brb after more science. But there’s probably a way to keep the external at 60hz and the deck display separate.
So I have my TV fed through my sound bar, but it does let me make sure it’s 60hz and 4k ✅
For context having them the same refresh rate only matters if you were playing on a PC and streaming to the Deck TV set-up over Steam Play.
Sorry for any confusion. My bad.
I got a CX and it works just fine on that.
Have you tried connecting the steam deck to another display just to see if it’ll work?
Everytime I run my steamdeck on my tv i have to do this precisely in this order 0. Turn off steamdeck 1.unplug steamdeck and disconnect video cable (hdmi) 2.turn on tv and choose hdmi 1 for input 3. Turn on steamdeck 4. Once turned on plug in hdmi cable 5. Video should turn off on steamdeck and turn on on tv 6. Now plug in power to steamdeck
I found this solution online in a forum after much searching. Its like witchcraft but must be done exactly in this order. Gerd lerk, lemme know if it works.
When do you plug the deck back to the dock? I tried this a few times with no luck :(
Wait, just so I’m understanding, the dock works with the LG TV if you connect your laptop or Surface Pro, but not your Steam Deck? If so, it sounds like there’s either a setting on your Steam Deck that needs to be changed or the Deck itself is faulty.
Does the Deck work with other HDMI monitors?
I agree that it might be a fault with the deck itself, doesn’t seem to work with my gaming monitor
I was just going to say. I have 2 LG TVs at home, not the official SD dock, but a couple of aftermarket ones, and they both work perfectly fine.
Also, LG TVs are notoriously slow to display after a change of HDMI (1 to 2 for example), so make sure you give it a few seconds (both my TVs can take up to 10 seconds to display).
What docks do you have? Might bite the bullet and just get one, in retrospect I should’ve just waited to see what would definitely work.
Nevertheless, I do appreciate the suggestions from everyone! Definitely didn’t think to try it with another display, oops
I got a brand called JSAUX. In my case I pickles 2 of the 6-in-1 because of all the USB-A ports, but they have different sizes.
This is the one I purchased:
https://www.amazon.com/JSAUX-Compatible-Ethernet-Charging-Deck-HB0603/dp/B0B7HVZNMB
