I bought a new CPU fan and when i took the one I had it came out with my CPU(AMD Ryzen 7 I stolefrom my friends abusive ex so I can’t even be upset if it breaks and I was careful I made sure I was grounded when handling it)inoticed the pins in the corner were bent. I unbent them but I noticed these were gone. This is the corner opposite the corner with the arrow. I had to install this when i bought a new motherboard and it was fine ever since so I know it was fine before. So to get a background on what circumstances left to my question.
My monitor gets no signal when I turn it on. All the fans work including GPU. None of my USB ports work so I can’t use the mouse or keyboard. I used different monitors, and even tried my display port. There are zero beeps, Motherboard AMD B450,and I even reseated my RAM and GPU. I also took out and put back in the CMOS battery, and flashed the bios. I’ve tried Google to no avail. I also don’t have a second motherboard to test with. I’m going to get it diagnosed at a repair shop but I’d like to know is I have anymore options. I’d just move the components to my Walmart Intel motherboard but it doesn’t have M2 for my SSD.
This is my first build. I have a background in tech but never got into the career. Is there anything I can do to salvage this or will I have to actually buy my own damn CPU?
Yes, it’s fucked unless you pay an expert to repair it.
And I mean an expert. Not a friend who has used a soldering iron before.
Probably cheaper to buy a new CPU.
Bent pins? Meh, go carful with a pocketknife.
Broken OFF? I can solder, but there’s no way in hell it will ever be the same. At my very best I might get it bootable, but the signal would never be the same over those pins.
It’s not actually that hard. You can use a hot air gun and tweezers at around 370c, or you can use a soldering iron (which does take a bit of practice) and a slim metal tube that the thin part of the pin will just fit into. Use soldering paste/liquid either way. You can order pins, but really it’s often easier to just find an old worthless cpu and desolder the pins of one of them if you don’t need a whole bunch.
Like I mentioned in the post I’m taking it to the shop. At this point I’m leaving it to the professionals
Be prepared to spend more than if you just replaced the board and CPU yourself.
Yes it’s bad, depending on the CPU it might be an issue or not (mostly depends on whether those are dummy pins in the socket or they’re actually necessary, in which case whatever they’re used for will not worl)
Those pins are probably still in the motherboard. You will have to replace both.
Edit: Also to avoid this kind of issue in the future, twist the CPU cooler to break the bond before pulling it off.
Wait, you not only stole the CPU, but felt the need to tell us about it, too?
We drove halfway across the country during the height of the pandemic shutdown to rescue that friend otherwise we wouldn’t have had the time. I don’t condone theft but fuck that man.
So we have the fact the CPU was stolen and the personal opinion of the perp that the previous owner was a bad person…