I’m not talking about a hex key that extends in length but one where it can collapse in on itself to increase in size.
I did some digging online but all I could find was a patent from a company called TeleHex but it kind of sounds like they came and went in the mid 2000s. They’re website doesn’t seem to exist.
I feel like it could save space in my pocket compared to a typical hex key set or a multibit.
I was hoping I could at least find a bootleg version on Ali Express.
Interesting idea, but I think it would suffer from being too weak structurally to be of much use. Each consecutive size would have to slide in and out and that design would cause trouble with maintaining rigidity.
However, if you would find one let me know. I would likely buy it too.
This is a solved issue. Use a bit set to have the different heads you need to fit on one driver. You can get ones that store the bits inside the driver.
Any telescopic mechanism is going to have a hollow centre and be weaker and prone to deforming. Larger hex keys are used to deliver more torque, making them hollows defeats the purpose of having a larger key, and small bolt and hex key should have been used to save weight and cost (or the same size to standardised the tooling).
Do you think the hollow core would make that much of a difference? The head of the key would still be solid and the depth required for each different size likely wouldn’t account to much. There would probably maybe half an inch at the opposite end from the head. If someone used a t like design, with the top bit being where the grip and hollow portion are, I imagine that would likely cut down a bit on torque exposed directly to the hollow section.
Perhaps you could get a bit kit like this and replace the bits with hex bits. This one is made by Victorinox
I wonder if there is a 1/4" hex drive set where the bits work like those old pencils
lol you’d have to sort through all of them one at a time to find the right one every time
True. You’d be giving up a bit of convenience for a bit of compactness. It wouldn’t be too bad with three separate tubes for Allen, Torx, and Phillips/flat/square
You mean like this - https://bikerumor.com/telehex-a-unique-universal-allen-key/
I had previously posted on Lemmy about 3d printing something similar for sizing, not for actual use.
I think this is a great idea! I guess strength might be the biggest issue? The metal would have to be layered really thin to fit all sizes, while being able to withstand strong rotational force. Although all the smaller sizes would fill the gap I’m not sure it would work. Making and testing this idea would be a good YouTube video, maybe send this as a suggestion to some engineering YouTubers?
