Follow-up: OpenBSD routers on AliExpress mini PCs
I got lots of replies to the last post showing the little OpenBSD internet gateway setup (super interesting; thanks!). Here’s more info and pictures:
https://www.srcbeat.com/2024/02/aliexpress-openbsd-router/
Something I’ve been meaning to share for years now.
“EVALUATION COPY BIOS” was the best bit
Is this a qotom? When I bought mine the description on Amazon said it could be turned on via power restore from bios but I have 0 power settings in bios. No wake on lan, nothing.
I’ve searched for how to update the bios (or if this would even help) but it’s hard to find clear information.
It might be a jumper on the board. Mine (Q770G4) boots on power, if I can organise some downtime with the family I’ll take a look at it (set it up ages ago so can’t remember).
Edit: CAB approval was easier than I expected! Mine is in the BIOS, under Chipset > PCH-IO Configuration, set State After G3 to Power On.
@1couchpotato Nope, this one is https://www.aliexpress.com/item/1005003378019857.html
Is it an APTIO BIOS? My setting was hidden in IT813 Super IO Configuration —> Advanced —> Restore AC Power Loss. Took me ages to find it.
This is really cool. I’ve been interested in running something like this. Does it make sense to have this as a dedicated firewall in front of my Unifi lan?
That’s how I’ve got mine set up, with OPNsense.
I’ve been using it a few years and I only know about half the stuff that pfSense/OPNsense can do. So I would advise newbies to just make small changes at a time because there’s a whole lot of stuff you can change. It’s worth learning, though. I wouldn’t use anything else for my main firewall/router nowadays.
What I meant was, I have a Unifi router and was thinking of putting a dedicated firewall in front of it. Does that make any sense or would the firewall on the unify be just as capable? Before the Dream Machine that is my current router I was running an opnsense router with my Unifi switches behind it so I’m not super unfamiliar with it I guess.
Well written article. Could you point to the instructions you followed to set up OpenBSD as your router + Firewall?
For starting out, Building a Router from the OpenBSD FAQ is helpful: https://www.openbsd.org/faq/pf/example1.html
I’m sorry if I seem obtuse but isn’t it easier to just set up OPNsense, which is a fully configured router/firewall on top of BSD?
Do you know what it’s idle power usage is? I’m guessing below 10W?
@czardestructo For the CPU Intel says 7.5W: https://ark.intel.com/content/www/us/en/ark/products/81071/intel-celeron-processor-n2830-1m-cache-up-to-2-41-ghz.html
So all up I’m guessing under 10W. I don’t know how much other components affect the power usage, though. And I’m about 200km away from where it is installed! Hoping someone more expert in hardware could chime in here :)
