I was checking to see how a 3/4" dog hole would look in a vise jaw made from two 3/4" pieces of plywood. Just clamped for the test, but would be glue for the real thing. Interesting to see the hole opened up. And luckily no splitting, but do you think it would work as an actual vise jaw? This is for a Veritas quick release front vise, so the jaw is only supported in the middle.
I’m not familiar with the term dog hole. You mean like what is shown in this image?
What is the purpose? How is that you did accidental?
Yes, they’re for “bench dogs”, which let you clamp boards against the top of your workbench. I only recently learned about them myself!
When I was drilling the test hole I wasn’t thinking about how it would look to open up the two clamped boards afterwards, so it was just a fun surprise to see the shape of the inside of the hole revealed like that.
I think that would be a perfectly good jaw vise. But only put in a few dog holes, as shown in their product photos, to maximize rigidity.
Man, this is some confusing perspective material. I thought, the holes protruded outwards, like a halved bottle cork. I just didn’t get at all, how they could be at such weird angles…
Personally I would go with some hardwood for the vise jaws. The plys can have voids and you a removing a lot of material from the sheets. If you can’t get a piece of hardwood thick enough just laminate 2 together.
Paul Sellers has been known to use plywood jaws in years past, but he is using some nice stuff with a lot of void-free plies, and he is not putting dogholes in it. Honestly, though, even the material you have there, if laminated to 1.5" and with just one or two 3/4" dog holes, it should work pretty well and would be easy to replace. If you are on a budget but want to do hardwood, this is a perfect job for red oak.
