This is an odd one. The only whole house shut off is on the city side of my meter and the person from public works I talked to said only the city could operate it and if it were to break while I operated it I could be held financially liable.
Does anyone know of a ballpark price to get a plumber to install on my side of the meter?
I saw this in youtube when I was watching videos about propress, planning a whole house plumbing redo.
http://easyfitisolator.us/
I think it’s only available in the states, but you don’t even need to shut off the main to install the shut off valve.
There’s also the c/plumbing at lemmy, they might be able your question.
Pretty sure a random fitting company isn’t paying for marketing on Lemmy.
Yeh I think these are currently like $400-500 here in Canada. My boss just ordered one (or something similar), interested to see how they function.
I had to install shutoffs in a unit this week and building management refused to shut the water off (for the floor).
I used a Rigid Super Freeze and it worked really well. Installed all 5 shutoffs without a disaster.
Full disclosure, I’m a carpenter/project manager, not a plumber by trade.
Rented from United Rentals, which is North America-wide I believe.
Had a pipe burst in a rental in Seattle. No shut off. I called the city and they came out and installed a shut off the same day.
Give em a call and see if they’ll put one in.
Last year a plumber charged me about $300 to have a shut off valve replaced. Took him about an hour.
Are you 100% sure? I thought we didn’t have one and it turned out to be in the kitchen pantry behind a plastic shield. I had looked for it with a plumber when we originally bought the house. Years later another plumber told us we had to have one because of code (in my state in the USA) and since the house was fairly new (less than 20 years old).
Mine was built in the 80s. I spent the morning crawling around my crawl space. There may be one down there but I can’t find it or it’s beind the sewer line I can’t get past, which just means I don’t have one. There is a knob in my garage which I have no idea what it goes it. I have turned it till it won’t turn both ways any nothing has happened that I could find.
There is a chance it’s “outside” in some sort of deep box but that seems unlikely unless you are in the south.
You need a plumber unfortunately and if you really don’t have one it might be a grand or more. Schedule with water company to turn it off at the street, cut, add a good modern shutoff in a useful location (which might require changing layout) and so on.
Good luck, but I would not do it myself based on the comments so far. Just fyi.
I can’t imagine it would be more than a couple hundred bucks assuming they can find an accessible point for it. Mine is in an unfinished room at the corner of the basement where the main line comes in and replacing it took the plumber life twenty minutes.
You can ask the plumber about coordinating with the city for shutoff. Maybe they’d know a guy?
But definitely don’t mess with it if. In my case I couldn’t find my external shutoff when I needed that internal one replaced so I had the city come locate it for me. They uncovered the plate, tested the valve and it broke immediately. Fixing it was a major excavation. The city guy told me how lucky I was that I hadn’t found it and tested it myself.
Mine is in an unfinished room at the corner of the basement where the main line comes in and replacing it took the plumber life
RIP poor plumber
Crazy thing is, one of the methods plumbers use to install a shutoff valve if they can’t turn off the city point is to freeze the pipe before where the new shutoff valve is to be installed. I always thought that was wild.
Mine comes in in our crawl space but I can’t get to where it comes in becasue of a sewer line that runs the width of the crawl and I can’t fit past it.
And I assume the line branches before it travels up into the walls? Or is there a chance it branches after it leaves the crawl space, in which case you could consider opening a wall for the valve.
Yes this is the way to go. I have a shutoff near the pipe that the city water comes in but the valve was nonfunctional. I had to schedule a plumber, then ask the city to shutoff my water on that day, the plumber came and replaced the valve, and the city came back to turn on the water. Basically the same process applies to you but with installing a valve rather than replacing one.