So. When I was in my junior year of college, the dorm I lived in was built more like a high occupancy apartment rather than a college dorm room, it had a living room and a kitchenette. No built-in stove but we were allowed to have a hot plate, so I went to K-Mart and bought a double burner one.
For some reason, one of my roommates had a cereal bowl that was in the shape of a saucepan. It was made of plastic, but it was black and had a handle. One day I walk into the apartment to an ungodly chemical smell and exactly the image above.
Probably the plastic “pan” was a children’s toy that made its way into an alternate use. I probably still have a few lying around from the toddler days.
Yup meltdowns happen sometimes. AND there’s the century-long legacy of radioactive waste!
Oh joy, I get to bust out these bad boys again! https://www.youtube.com/watch?v=4aUODXeAM-k https://www.youtube.com/watch?v=lhHHbgIy9jU
There’s also that one guy who touched the hot part and is now using that tiny blister to conduct a decades-long smear campaign against the kinds of pots used at Three Mile Island.
kyle hill is interesting to me because when he is making videos about nuclear it is either the most terrifying nuclear horror story yet or facts and statistics about how safe nuclear is. I personally believe nuclear to be a super safe and efficient way to create energy, its just something I noticed. Makes me think about how common coal accidents are and how little they are covered compared to something supposedly scary like nuclear.
I agree. We should deal with nuclear waste in the same way we handle the waste from other fossil fuels: by spreading it over the entire planet in a thin, even coating so that everyone is equally affected!
Back in middle school, our science teacher decided to make the class do a debate about different types of energy sources in order to learn about their advantages and disadvantages. I was on the pro-nuclear team, and we were wracking our brains trying to come up with a rebuttal to “but what about the waste?” until some madlad basically came up with this great argument:
We can just dump all of the nuclear waste on Belgium. It will take a really long time before it fills up, and nobody cares about Belgium anyway
The anti-nuclear team had no good response, and we actually got a point for that argument because we looked up the relevant statistics (nuclear waste output, belgium surface area, etc.) and calculated exactly how long it would take to turn belgium into a radioactive wasteland.
The dangerous radiation disappears much much sooner then that. And if its millions of years, the local life would adapt, more then it already has. Interesting related info: https://en.m.wikipedia.org/wiki/Radiotrophic_fungus
You’re so right - we should just pump all our crap out into the biosphere instead and keep burning coal.
Solar and wind are currently both cheaper than coal, and rapidly getting cheaper.
Nuclear is more expensive, and the cost is growing. There will be almost certainly be no private investment in nuclear in the future unless it’s ideologically driven.
https://en.m.wikipedia.org/wiki/Cost_of_electricity_by_source
Luckily waste storage is a solved problem.
Drill hole in bedrock, put waste in hole, backfill with clay.
Most of our power generations comes from “make water hot, hot water boils into steam, steam spins magnet”
Nuclear power is just a different source of heat.
It’s all variations of “make things spin.”
Either by heating up water so steam makes thing spin, using wind to make thing spin, or moving water to make thing spin.
I am willing to bet if you watched photo cells on solar panels under a microscope, the light would make something spin.
I am willing to bet if you watched photo cells on solar panels under a microscope, the light would make something spin.
Nope, solar cells are solid state devices. ;)
Other examples of solid state electronic devices are the microprocessor chip, LED lamp, solar cell, charge coupled device (CCD) image sensor used in cameras, and semiconductor laser.
Nope, solar cells are solid state devices. ;)
except for the fact that you actually want a grid tied interia component for stability.
So even in that case, you still tangentially need a “spinning mass” even if emulated in software with how it supplies energy to the grid. It’s still technically there.
Only alternatives that I’m aware of:
- solar cells (converting photon energy into electricity)
- acid batteries (converting chemical energy into electricity)
- peltier devices (converting heat differential energy into electricity)
- induction (converting electrical energy into electricity on a different circuit)
- bioelectricity (using biochemical energy to produce electricity)
- static buildup (using friction between various materials to produce a voltage differential)
I think there’s a way to use lasers to generate electricity, too.
Producing acid batteries, or any batteries isn’t power generation. It’s turning chemical potential (which was generally produced in an energy-consuming process) into a storage device for electrical potential.
Induction is just changing the properties of your electricity, not generation.
They are all just ways of converting energy from one form into electricity. Every single one of the ways we “generate” electricity ultimately comes from gravitational energy. By the time we use it to power electrical circuits, it all has gone through various energy-consuming/losing processes.
The list wasn’t so much a “ways to create electric energy that aren’t spinning turbines” as a “power sources for electric circuits that aren’t spinning turbines”, which is why I included chemical and electrical, even though they often aren’t very useful without another source of electric power.
We’ve had this discussion here on lemmy a few days ago: practically all electricity generation is by making turbines spin.
Hydropower means river makes turbine spin. Wind power means wind makes turbine spin. Coal/gas power means combustion makes turbine spin. Nuclear means hot steam makes turbine spin.
However, that doesn’t mean that all electricity sources are spinny things.
- solar cells have no mechanically moving parts
- batteries utilize chemical energy directly
solar cells have no mechanically moving parts
ironically, large grid tie systems are starting to “emulate” the spinning mass behavior of turbine generators, since there’s an exponential failure issue waiting to crop up if you aren’t careful, as texas has already learned, a very significant part of your solar generation can just, go offline, if it decides grid conditions aren’t suitable, which can lead to LARGE drops in power production and frequency, which is likely to kill even more generation.
So the solution is to make it emulate the physical mass tied to a turbine, or at least, more generously provide power in fault like conditions, to prevent this sort of exponential breakdown of the grid. You could of course, use a large spinning flywheel to regulate grid frequency, as is being used in a few places right now. I’m not sure how popular that is, outside of wind energy. It’s likely to get more popular though.
weird little side tangent, but the frequency of electricity on the grid is essentially directly tied to the rotational speed of all turbines currently on the grid, meaning there is a very large inertia in the grid frequency, it’s weird to think about, but makes perfect sense, and it provides for an interesting problem to solve at large scales like this.
Batteries are really fucking cool btw, the fact that you can just chemically store electricity, and then use it, is really fucking crazy. The fact that it’s the most accessible technology is also insane to me. But maybe it’s just the adoption being the way it is.
I think people underestimate the value of intertia in power generation. I liken it to the way capacitors regulate voltage changes or coilovers absorb bumps and vibrations.
The inertia of the generators connected to the grid helps stabilize frequency changes caused by blackouts, power plant issues, etc. by resisting and thereby slowing down frequency decline. It buys time for grid operators to find a way to balance loads in a way that doesn’t weaken or disable the grid as a whole.
Here’s a great NREL report explaining how this all works, and what other systems we use to stabilize grid frequency.
I think people underestimate the value of intertia in power generation. I liken it to the way capacitors regulate voltage changes or coilovers absorb bumps and vibrations.
the best way to think about it is a literal flywheel, because that’s what this is, just at a grid scale, and directly tied to the frequency.
The inertia of the generators connected to the grid helps stabilize frequency changes caused by blackouts, power plant issues, etc. by resisting and thereby slowing down frequency decline. It buys time for grid operators to find a way to balance loads in a way that doesn’t weaken or disable the grid as a whole.
TLDR it moves the “OH SHIT OH FUCK” window from about < 1ms worth of time in the worst cases, to the much more manageable, seconds window.
It’s a potential challenge with moving to renewables, but not a significant one, i think. This is also a big advantage to having sources based on thermal generation, like nuclear.
Also, solar trackers are a big deal for large farms when you start to scale above residential. Those trackers physically moving the panels to optimize generation are moving pieces.
this is sort of true, it depends on the array, but from what i understand, unless you’re doing an experimental array, it’s most common to just use fixed axis mounted panels, it’s much cheaper and more cost effective that way. Ideally you would use a tracking array, which is better, but more complicated, and requires significantly more maintenance and investment. Single axis tracking arrays might be a clever solution to this problem though.
Regardless, it’s not relevant to the grid inertia problem at hand.
to be fair ; its both.
It is not the top one in the typical usage of the word “nuclear energy.” Sure, it is nuclear energy, but that normally refers to electrical infrastructure, not nuclear weapons. Nuclear electricity is pretty much always just heating water up in a safe and controlled manner, and using that to spin a turbine.
Until something goes wrong and it is not safe and controlled anymore. You know, because of the whole exponential chain reaction thing.
So do you still believe in bloodletting to cure colds or the earth being 10,000 years old?
meltdowns do not resemble bombs at all. nor are they really possible either.
that’s the thing though, the exponential chain reaction isn’t possible.
The problem is that when fuel breaks the strictly controlled fuel rod environment, it stops being cooled properly, and regulating it becomes more interesting (not impossible, there are some clever solutions out there, look at metal cooled reactors for example) and as a result, the spicy particle generation tends to break containment, which is why we have things like PCVs, which contain the corium long enough to at least prevent the elephants foot troll, which is then contained by the secondary containment (the building around it) which is also contained by the rest of the building, surrounding the containment building.
It’s pretty hard to fuck up a reactor. Even harder when the idle state of the reactor is safe, as is with metal cooled reactors. Those are some of the most promising designs, because you can literally just do nothing with them, and nothing bad happens.
That’s just another way to turn heat into electricity. Those thermocouples could also be used on a campfire.
You think that’s hot shit: https://www.sciencedirect.com/science/article/abs/pii/S2468606921000538
In theory, if you made it small enough, you could make a gamma rectenna. Considering gamma rays are often smaller than an atom, you’d have to make the antenna out of something other than atoms though. Good luck.
