If anyone is interested, the problem was due to packing material not being completely removed from under the printbed.

So, the PSU voltage switch is for setting input voltage. You might be running it on 110V instead of 230V, though unlikely but it doesn’t hurt to check.

Checking the y motor and endstop wiring I recommended because I had a similar problem on my x-axis when my motor wire and endstop wire came loose, where the motor was jittering and buzzing, but not moving.

The .cfg file is the configuration file for Klipper firmware, which is taylored for your printer. Since you said that your firmware issues got fixed I don’t think that’s it, but if nothing else, redownload and reinstall the .cfg file and if that does not help, reinstall klipper as a last resort. Do so only if nothing else helps.

If you need more help, I could help you through video chat. Just DM me.

Just in case, check the PSU Voltage. Check the plugs on the Y axis motor. Worst case, you might need to redownload the CFG file for your printer. Try that. Write again if none of that works.

What country are you located in?

So I have used the sv06 and had a bit of a run in with the sv07. Both are decent machines with their own quirks. The sv06 needs bearings replaced after 3 months of use at the latest, after that runs perfectly. The sv07 uses v-wheels, and is therefore lower maintenance. They both use the same toolhead design and both print well enough. sv07 is a bit more finnicky with cooling (special klipper command for the big fan) but they are both decent machines. I personally run a heavily modified Ender 3 v2, but currently, the Sovols are some of the best bang for the buck. Right now, I would buy the sv06, change the bearings from day one and that’s it. It is basically a 1:1 copy of a Prusa, and printing replacement parts for it is extremely easy, if anything ever breaks. The only thing it “lacks” is a filament sensor (haven’t had the need for one in the time I have been printing), but that is easily added. Do your own research though. Lost in Tech has some great reviews on both machines.

All printers use the same components. Same motors, leadscrews and belts. If the printer is built well, the precision will be the same. You obviously have play in some machines, but due to the variance in filament it can vary from negligible to basically nonexistent. It’s not the machines fault most of the time. Polymers have variance and sometimes unpredictable behaviour. Just part of the game.

So lets start from the top:

1. All printers have the same precision.

2. I guess you’re talking about input shaping, which reduces artifacts and shaking of the printer (a little)

3. Most budget printers right now have lots of the same creature comforts that this printer has.

Right now the biggest things are community/aftermarket support (moddability), price and firmware. You should get Klipper to get input shaping, so that narrows it down. Look for some klipper printers (e.g. Sovol sv07) and decide which one you like best. They are almost all the same, save for qc and qa issues by some companies and sometimes lackluster support. Any printer can produce awesome prints. It’s only a question of how much time you have to fiddle with the settings. Cheers!

Sovol sv06 is one of the best ones in terms of price to performance. If you want great customer support, get a Prusa. I can’t recommend bambu lab because of their closed off system and bad security practices.

Apple sux ass anyway.

Yiff