Google’s LLM got one critical fact wrong, of course. If you only need occasional color printing, an inkjet is still the wrong answer. The right answer is probably just to have Staples or your local print shop print for you, honestly. The ink dries out in disused inkjet machines and that’ll cause you no end of headaches. Or force you to buy a set of expensive cartridges just to print one damn page, because the last thing you printed was three months ago.
Color laser printers aren’t even that expensive anymore. Sure, a set of color toner cartridges may cost well north of what a set of inkjet cartridges would run you, but the difference is that the laser toner will probably last many home users a lifetime.
It’s also worth checking your local library which might offer some basic printing services. Could work out cheaper
Yup, ours is $0.10 for B&W, and $0.25 for color. Computers are free (if you have a library card, which is free), and the staff is available to help you with whatever you need. I’m guessing they’d let you print for free if you really couldn’t afford it.
So your typical school essay would be $1 or so.
Definitely look at the library. Mine allows me 20 free pages of B&W, or 10 pages of colour per month. After that it’s $0.10 for B&W and $0.20 for colour. Pretty hard to justify actually buying a printer to myself at this point. Definitely not as convenient as having a unit at home, though.
They came up with a “solution” for the drying problem. You need to keep the printer on forever so it doesn’t let it dry.
I wish that would work. My Epson was always on and the ink kept drying. After it clogged the print head once too many times and I could not fix that in less than 10min, I just gave up on the piece of crap. I now go to a print shop to print what I need which, admittedly, nowadays is just a couple of times a year.
If you only want 6x4 photos a dye sub printer like a canon selphy isn’t a bad option, it’s what I use. Kinda expensive per print but quick and the ribbons don’t dry out.
At this point, 4x6 prints at my nearest Walgreens are like fifteen cents a pop with a random coupon code and are ready within the hour. I imagine a dozen other chains are comparable.
Hey, I own that printer! It’s a good printer.
Remember kids, always buy laser, never inkjet.
Yup, I’ve had a previous model (HL-2170W) since like 2006. The nic is dying now, but the printer works fine.
Brother printers are the only brand anyone should buy.
Same, and the only maintenance I’ve ever needed for mine is putting paper in it
The wired Nic on mine is dead, WiFi only now. one time modeled and 3d printed a part to fix the feeder. I will keep this fucker running forever.
I’d agree with the exception of artists who sell their printed work (ex: photographers, graphic designers). They’re not only making money from their prints but also printing in color frequently enough that the cartridge doesn’t dry out.
We have three of them at my office. I am certain we exceed the duty cycle they were designed for by several times. The one at the front desk has been bitching about needing an imaging drum replacement for I think three years at this point, and it still prints just fine. I’ll put a new drum in it when the existing one stops working.
Anyone have a recommendation for a small color laser printer? Like shoebox size.
My place is pretty small, and I don’t have much desk or shelf space. It doesn’t make sense for me to waste desk space on something that I use 1-3 times a year.
I’ve been using one of these tiny HPs. The ink is a fucking racket, and I’d love a laser alternative. This size is great. I can fold the trays and throw it in a drawer. It’s only 16 x 5.5 x 7in.
Edit: Found one. It the HP LaserJet Pro M15w
If you only need it 1-3 times/year, why not just go to your local library? In my area, it’s $0.10 for B&W, $0.25 for color, and I can get some books to read at the same time (I go almost weekly).
Convenience. I can’t print when the library is closed, I need to travel over there, if need to print another revision, I need to travel back.
Ideally like the convenience, but I don’t want to deal with HPs shitty ink sponges that instantly dry out. I’d like something that lasts.
I don’t think you’ll find a color laser printer that size. They use pretty large drums to hold the toner. It’d be hard to even find a mono laser printer in that size.
I don’t own a printer because it’s 2024 and the only good reason to own a printer is photo/art prints at a scale where outsourcing it isn’t economical.
I’m aware other reasons exist, but they’re bad reasons that mostly boil down to someone being bad at computers.
Nah, there are definitely cases where you need to print stuff on paper, and need said paper fast enough to warrant a printer. If I use my company credit card for expenses I need to account for that, and for legal reasons I need to send that to our accountant in printed form. I can’t legally mail it to him.
Now I could obviously take 30 minutes and print it at the library, but those 30 minutes would add up fairly fast, making a printer the more accessible and economical option.
Now I could obviously take 30 minutes and print it at the library, but those 30 minutes would add up fairly fast, making a printer the more accessible and economical option.
Privacy is also an issue. There might be reasons why you don’t want to have something printed out at the library/local print shop, like if it’s tax documents, and someone hitting “repeat job” could just have it spit out personal info.
I need to send that to our accountant in printed form. I can’t legally mail it to him.
This is exactly the sort of thing I meant by “someone being bad at computers”. That someone might be a government regulator in this case.
I use it a lot for construction. Printed job specs are much easier / faster to deal with than a computer on a job site. You can staple them to a wall, quickly draw on them, use them when your hands are filthy, have multiple large copies floating around, etc. Paper is usually just a better solution for that environment.
Take a look at a Canon PIXMA TR150.
There are plenty of other brands that make this same style, this was just the first I found.
Now if only they had a small portable printer like that that did 11x17
Reading blueprints off 8x11 is damn near impossible unless you blow them up
the only good reason to own a printer is photo/art prints
… how do you read your emails without a printer?
All printers are bad and the Brother Printers are consistently the least bad.
My Brother was giving a toner end of life message and refusing to print.
I took the toner end cap off via two screws and reset the gear toggle, and now it prints again.
Cool story.
I’ve got 2 brother printers, never had a problem. I’ve used Epson, HP and both were an absolute shitshow to setup
I got an HP because it was remote accessible, and had a scanner with a feed tray as well. It prints maybe 10 pages on a new cartridge. Costs 30 bucks for a new one. 3 dollars a page to print.
Bought a brother LaserPrinter that only prints B&W but at like 2000 pages. HP just does scanning now, nothing else
I did it, but eventually it didn’t. So I gave in and replaced the toner.
I got nearly 3k prints from the starter cartridge, so not bad. My replacement should get like 25k. Given that I had the original for ~8 years, I don’t think I’ll ever need a B&W printer ever again.
What makes you say Brother printers are bad? I’ve had no complaints with them at all.
Maybe “bad” is the wrong term. But every printer - Brother included - has its own little set of firmware to maintain and special connection protocols to support. The interface between OS and printers, generally speaking, sucks. Wifi connections are unreliable. Its very easy to get into contention with multiple devices. And that’s for a simple little household printer.
Talk to my IT staff about how much of a pain in the ass commercial printers are. More machines, each machine has to connect to multiple printers, and the software to handle these cases generally sucks. Brother’s are the least-bad, but they’re still annoying to configure and periodically unreliable to access.
I can add that we have two Bother multifunction laser machines at work (in addition to three of the venerable HL-2360’s) and the fucking things will lose scanner association with the PC’s in our office at the drop of a hat, all the time, for no identifiable reason. And there is no way to reassociate a printer with a computer short of uninstalling and reinstalling the driver package, after which point it’ll inevitably cack itself in a week or two anyway.
The things print just fine but getting them to scan is like pulling teeth. Everyone in our office but me is afraid of the scanners on top of the things now, they can never figure out how to make them work, and even when they do it right we invariably found that their computer has magically and silently lost connection with the scanner component – and only the scanner component. The software side of these things is garbage.
The software side of all printers is probably garbage, as you say. For instance, my Canon ImageClass at home scans just fine, but there’s no way to make it do double sided scanning through the sheet feeder by default, or from any preset or option the screen on the printer itself. You have to set up a custom preset via the driver tool on a PC, it can only remember two presets, and you can’t rename them. So you just have to know that “Custom 1” is double-sided-scan-from-sheet-feeder-and-make-it-into-a-pdf. You can set it up to do a different thing in “Custom 2,” and then just fuck you I guess if you ever need to do a third thing.
Etc., etc.
I’ve got a Brother laser printer myself last year, and I like the printer, but I’ll agree their software is bit of a hot mess. I used to have an old Canon multi-function laser printer that wasn’t locked to 1st party toner, and their software was much easier to install and use. But it finally broke down after >10 years of moderate use and the new models are reportedly DRMed, so Brother was the only decent option.
I have a consumer grade Brother and it’s pretty good, but it has stuff I just can’t fix:
- wireless G only - it has Ethernet, so it’s fixable
- scan to PC doesn’t seem to work - I just use a USB drive, so it works
- copies and scans use the built-in display, so if that breaks, I’ll probably be SOL
It’s about as good as a consumer printer gets. I paid $150 or so for it, and it has lasted 8-ish years so far without any issue (I only remember one jam, which took 5s to fix).
But I’d like it so much more if it had open firmware and open schematics. If it did, I could probably fix each of the above issues, as well as implement a ton of cool features. I’d start by making the web page a lot better, making scan to my Linux desktop work, and override the stupid low toner check.
So I’m satisfied, but things could be better.
We got one over a year ago and it’s been nothing but a dumb appliance for us - it just works.
The industry has made us accept a lot of sub-par configurations, and we need to stop this.
-
no more wifi. If you like it, put a cable on it. ACLs get simpler and spooky radio issues become a distant, comical memory.
-
Whether it’s PDF or something better, find the body pushing for a common format and give them eyeballs and money. Make printers interchangeable again.
I bought two printers in the last 2 decades. One looked like the model in the article, which I gave to a family member. The other one is a Brother Laser printer with a scanner.
I’d rather get a 50 pack of markers and start coloring in my printouts than buy a crappy inkjet printer. Plus it’s bonding time with my nieces and nephews. I pay them in cookies.
Or you can just go to your local library or office supply store and print in color. My library is $0.25 for color prints, $0.10 for B&W. B&W is almost always good enough (we mostly print coloring pages, word searches, and stuff like that), and the quality of the prints are way better than any inkjet I’ve seen.
I also have a B&W Brother printer, and I finally needed to replace the toner after almost 10 years. I bought it when doing a ton of government paperwork, and then random printouts for a weekly community volunteer project. I got something like 3k prints. My new toner cartridge should do 25-30k prints, so I’ll probably never need to replace it. It’s a multi-function device, and I used the scanner a ton during COVID at-home schooling, and I’ve never really had an issue with it (I’ve printed from Windows, macOS, and Linux, all w/o issues).
We also have a small, portable photo printer that my wife can use from her phone, which is really handy for family get-togethers. We can go from “I’d like a print” to “here you go” in like 2 min, and it’s small enough to take in the car with us.
I still recommend Brother printers, but some MFC-* models do support/enforce OEM lock-in after firmware updates according to reports. All the info is 2 years old and I so want to be wrong on this. Have they reversed that decision? Firmware update disables 3rd party toner
I just advised a business on a tech proposal, including printers, and the bid quoted one of the lock-in models. Of course it’s a company so toner is a business expense and they arn’t pinching pennies, but the owner is with the us in not supporting this decision. Props to them.